Let's introduce the relationship between the main performance indicators and basic technology required by resistive touch screen customers.
The first thing to talk about is the mechanical performance and optical performance of the operating load. The operating load is the pressure required to achieve the touch function. Depending on the input method of the touch screen, such as a finger, a pen, or both, and different purposes, the level of action load requirements are also different. Generally, the requirements for finger recording are relatively low. There are three technical factors that determine the pressing load: one is the material and thickness of the upper substrate. Soft and thin are the advantages of the upper substrate; the second is the density of dot spacers printed inside the touch screen. The lower the density, the more conducive to reduction. Pressing pressure; the third is the gap between the upper and lower substrates, the larger the gap, the greater the pressing force, the smaller the gap setting, the smaller the pressing force. However, the smaller the gap between the upper and lower substrates, the more difficult to control its uniformity, and the interference fringes of Newton's rings are likely to occur. This is similar to the thick chromaticity unevenness (cell gap mum) caused by the cell in the liquid crystal display panel, but the liquid crystal material is filled between the upper and lower substrates in the liquid crystal display panel, and the air layer is between the upper and lower substrates of the touch screen. Newton rings are more likely to be generated in the touch screen. In order to prevent the creation of Newton's rings, various manufacturers have made improvements in their processes and designs. There are restrictions on the thickness of the substrate on large sizes. It is not enough to improve the manufacturing process and design of the touch screen. Therefore, the surface of the upper or lower substrate used is embossed to scatter light, reduce light interference, and weaken Newton The occurrence of the ring.
Some key performances and technologies summarized from the perspective of touch screen manufacturers. The touch screen is set on the top layer of the display device. The factors that have a greater impact on the brightness are the transmittance and the reflection of ambient light. In addition, since the film surface of the touch screen is directly connected to realize the touch function, the hardness of the surface is also very important for the touch screen. Generally speaking, the surface material processing of the touch screen substrate is also an important technical indicator that determines the quality of the touch screen product.
In addition, when making touch screen products, the matching of touch screen and liquid crystal display device is also very important. The bonding of the touch screen and the liquid crystal display device usually uses double-sided glue to fix the periphery. In this way, there will be an air layer between the touch screen and the liquid crystal display device, resulting in a decrease in transmittance. Therefore, in mobile phones as the center products, the use of this gap bonding method has been gradually reduced, and large-size products are gradually decreasing. Use this fit method. The anti-glare treatment on the surface of the touch screen and the pixel size of the liquid crystal display panel will cause the screen to shine or water ripples. Corresponding design technology is required. The polarizing plate of the LCD display can be set on the uppermost layer, which is a common use scheme of the touch screen and the LCD panel, which is called the inner touch panel (Inner Touch Panel).
In addition, if organic ELe is used in the display, the design of the glass substrate used as the organic EL sealing gap function and the substrate used as the TP function may be implemented.

