What are the core technologies of indoor led small-pitch displays

Jun 27, 2021

Залишити повідомлення

With the development of LED technology, the brightness of LED electronic display screens is constantly improving, and the size is getting smaller and smaller, which means that more and more indoor LED small-pitch display screens will become a trend indoors. 2018 is the year of the explosion of indoor LED small-pitch displays. This is mainly due to the development of LED lamp bead technology. Small-size LED lamp bead technology is becoming more mature and the quality is becoming more stable. Now the display with a pitch below P2 is called Small-pitch led display. Shenzhen Huabangying Optoelectronics Co., Ltd. is a small-pitch LED display manufacturer and a small-pitch LED display research and development, production, sales and service manufacturer. Here is a brief introduction to you what are some of the core technologies of indoor led small-pitch displays?

Indoor LED small pitch display


1. Effectively reduce the dead light rate and ensure the stability of the screen.


According to industry standards, the dead-light rate of traditional LED displays is as high as one in tens of thousands, but the small-pitch LED display is temporarily unable to do so. If according to the previous standard, there is a dead light in 10,000 square meters, then the display is almost Can't watch. Therefore, the proportion of dead lights in the small-pitch LED display must be controlled at one hundred thousandth or even one millionth to meet the needs of long-term use. Otherwise, if a large number of dead lights appear within a period of time, users will not accept it.


2. Achieve low brightness and high grayscale.


Many people know that human sensors and outdoor lighting have different requirements for brightness. They need higher refresh rates and energy-saving requirements. Indoor lighting needs to lower the brightness. Experiments show that from the perspective of human eye sensors, LED The brightness of (active light source) is 2 times higher than that of passive light source. In terms of specific data, the best brightness of small-pitch LED display into the room is 200-400cd/m2. However, the gray-scale loss caused by the reduction of brightness still needs technical supplements.


3. Double backup of system power supply.


Any group of small-pitch LED display modules can be repaired from the front, and the repair is faster and more convenient; the repair speed is more than 5 times faster than traditional products, the operation is stable, the failure rate can be reduced, the power signal is dual standby, to ensure long-term stable operation, support 724 hours continuous work.


4. Support system access and multi-signal and complex signal display and control.


Compared with outdoor displays, the small-pitch LED display has the characteristics of multi-signal access and complex signal access. For example, video conferences in multiple locations require remote access signals, local access signals, and multi-person access. Experiments have proved that simply adopting the split-screen solution to achieve multiple signal access will reduce the signal standard. How to solve the problem of multi-signal and complex signal access requires technical support for small-pitch LED displays.


5. Realize seamless splicing and fast correction.


The biggest advantage of small-pitch LED displays is seamless, but the requirements for splicing are higher. For liquid crystals, as long as the splicing is uniform, there is no problem, and the stitches are not obvious. But the small-pitch LED display cannot be like this. If the squeezing between the modules is too tight, bright lines will appear, and dark lines will appear after the modules leave. Therefore, it is difficult to find a suitable splicing. Therefore, it is necessary to provide a certain guarantee for the processing technology, calibration technology and efficiency guarantee and good combination of the cabinet.


Послати повідомлення